How To Clean Brake Pads

Rate this post

An efficient braking system in any car or motorcycle should have good working brake pads. When you step on your brake pedal, the pads should quickly slow or stop your machine. However, with time and continuous use, brake pads get worn out or become less effective. Most of the common disc brake problems won’t pose an immediate danger.

But then again, this should motivate you to make the necessary arrangements and have the motorcycle or car thoroughly checked. You don’t have to stress if you are well-acquainted with clean brake pads or general maintenance. But if you are a first-time owner, there are several signs of worn out or ineffective brake pads to know. They include:

  • Noisy brakes
  • Brake warning light illuminating on your dashboard
  • Hard or spongy brake pedal
  • Vibrations when braking and
  • Burning smell while driving and after hard braking

What to Know About Brake Pads

How To Clean Brake Pads

Brakes don’t just keep you safe, but also any other person riding with you or a bystander on the driveway. If they are in good condition, it will be easy to cycle or drive at any time stress-free. Brake pads are built to withstand specific temperature differences and guarantee unparalleled braking efficiency.

You should, at all times, make sure you invest in the best braking system. Whether you invest in non-metallic, semi-metallic, or organic brake pads, they should all stand out and satisfy your needs. Disc brakes are the number one choice among many cyclists and drivers as they are more advanced and effective.

They also guarantee high braking performance or power and can stop any high-speed motorcycle or vehicle. The types of brakes you pick for your bike or car matter a lot, and each provides impeccable advantages. Significantly, you should make sure they are working perfectly, and this involves making sure they are clean.

For many people wondering whether it’s wise to clean brake pads, the best answer is a “yes.” You should easily clean your disc brakes, as long as you are fairly handy and follow proper steps. In essence, there are brake pad cleaning tips to follow. Read on and find out more.

Cleaning Brake Pads- What to Know

The brake system is quite sensitive and easily invaded by dust, dirt, and corrosion. Rust can cause a damaging effect to your brake pads, and you should make sure they are correctly cleaned all the time. Proper lubrication is also necessary to increase the braking power of your systems.

So if you are wondering how to clean the brake disc, it’s indeed possible and quite efficient. However, how to clean your brake discs is imperative and should be done with a high level of perfection. The workmanship involved and skills should stand out.

When figuring out how to clean brake pads, many people fret about the cost of the project. But why trouble when this is a task you can do-it-yourself and save a lot of money. DIY is the best option because you know when your brakes need cleaning.

No doubt you are familiar with common signs your brake pads need cleaning. Brake pads become dirty with oil or grease, especially when lubricating the entire transmission system. This contaminated oil will soak the pads and create film or coating that reduces the braking power.

Dirty is usually the primary source of screeching and annoying noise when braking. Many people rush to replace their disc brakes when they get dirty. But why stress when you can clean them to perfection and save a lot of money.

If you can DIY, you need to figure out how to clean brake pads and undertake this amazing project stress-free. It’s a straightforward project if you know where to start and all the supplies you need. The bottom line is that you should undertake this project if you have the skill sets and have done it before.

Most importantly, everyone has to start somewhere, and you should take time to learn how to clean brake discs. Many inexperienced motorcycles or car owners have done it, and you can do it. Just stay motivated and grasp every step involved.

Cleaning Brake Pads on a Car- Step by Step Guide

How to clean brake pads on the car is a project you can undertake if you know where to start. You don’t want to constantly worry about your brakes’ optimum performance when you can efficiently resolve this problem. It takes your dedication, time, and few efforts to undertake a meaningful job. Here is how to get down to cleaning your car’s disc brakes.

  • Make sure you are equipped with all the necessary brake pad cleaning supplies. For instance, you will need the best brake pad cleaner, wire brush, clean cloth, and container to hold falling pieces from the braking system.
  • Position the car perfectly, and a garage hoist is the best solution. If you don’t have any, use jack stands for the job. Lift the car and remove the lug nuts. And pull the wheel off.
  • Grasp the caliper firmly and slide it up and off the disc brakes. Use a wire to hang the caliper out of the way. Make sure you don’t stretch the flexible brake hose.
  • Remove the brake pads out of the caliper. Use a screwdriver to remove the retaining clips if there is any in your calipers.
  • Open the hood and go on to loosen the cap on the main brake fluid reservoir. Be cautious enough as you don’t want the fluid to overflow back into the reservoir.
  • Time to clean the brake disc. Remove the contamination or dirt on brake discs using cleaning fluid or brake cleaner. Then you can go on and wipe the discs with a clean cloth or rag. Scrap off any stubborn dirt using a wire brush.
  • Clean the caliper using cleaning fluid. A wire brush is excellent for those stubborn stains.
  • Finally, lubricate the caliper pad slides or bolts before you put them into their correct position. Be cautious not to get the grease on the discs or brake pads. Now you can reassemble the brake system and lower the car. Test the brakes and ensure they are working excellently before you can drive your car around.

Cleaning Disc Brakes on a Motorcycle

Probably you have taken your motorcycle around for a couple of rides on different terrains. The brake pads or discs are common components that get dirty or coated in road muck. However, you don’t have to worry as it’s not that daunting to learn how to clean disc brakes for motorcycles.

Dirty disc brakes will slow the braking performance of your motorcycle and increase wearing out of the pads and wheels. There are many ways to clean dirty disc brakes, but you should go for the most effective solution. You can decide to use the best rubbing alcohol or brake cleaner.

Ready to learn how to clean disc brakes motorcycles with much ease? Here are helpful steps to follow.

  • Take apart your brakes to make it much easier to clean the discs. Use disposable gloves to protect the brake parts as most parts are sensitive. You also don’t want to transfer any oil to these parts.
  • Flip the bike over so it’s easier to remove the cycle wheels.
  • Remove the bolts holding your motorcycle wheels in place. Now you can easily separate the wheel from the rest of the motorcycle.
  • Use the Torx key to unscrew the bolts holding the disc rotor. Once you remove all the bolts, pull the disc rotor off the wheel.
  • Unscrew the bolts from the disc brakes. Now pull the disc brakes out of the motorcycle caliper.
  • Wipe down the wheel hub using a clean rag dipped into the type of brake cleaner you are using. Rub the wet cloth around the edges of the wheel hub and get rid of the dirt or crud.
  • Using your specialized brake cleaner wipe both sides of the disc rotors and rub away any dirt on the surface.
  • Feel free to use sandpaper to rub over the sides of the disc rotor. You will make it easy for the brake pads to hold onto these discs.
  • Clean off the disc brakes one more time and clean any leftover dirt.
  • Spray down the calipers with your brake cleaner and rinse them with a clean cloth.
  • Now you are suitable to reassemble and install the disc brakes. Slide the pads into the caliper and secure them with the retaining bolts into their respective place.
  • Reattach the motorcycle wheel with the central bolt. Your disc brakes are now great for use and will no longer show signs of damage or make squeaky noise.

What More to Know about Cleaning Brake Pads?

Because it’s possible to check brake pads without removing the wheels, you can also do it when cleaning them. But is it possible? Cleaning disc brakes without removing the wheel can be a daunting task if you don’t know where to start, but you can still achieve much.

If you learn how to clean brake pads without removing the wheel, you will find the whole process incredible. You can embrace several techniques, but you will find spraying the best brake cleaner quite efficient. Brake cleaner effectively removes dirt, oil, grease, and other debris from the braking system.

It’s also relatively cost-effective to use a brake cleaner and will not require a lot of preparation time. You can use this cleaner on brake pads, caliper units, rotors, or brake linings while they are still intact. Brake cleaner easily loosens dirty and evaporates quickly without leaving any residue behind.

It’s pretty simple to apply brake cleaner without removing wheels. However, you should always follow the provided instructions on the user’s manual. If you are not comfortable with this process, there is also a disc brake cleaner alternative to rely on.

You can effectively clean disc brakes using alcohol. Cleaning disc brakes with alcohol is not that daunting. You can do it yourself and at the comfort of your garage. Follow a few steps.

  • Shape the alcohol solution vigorously.
  • Apply it to the brake pads and clean the contaminated or dirty surface.
  • Allow the alcohol to evaporate.
  • Wipe with a clean rag any residue off the brake pad surface.

Now that you know it’s possible to clean brake pads with alcohol or brake cleaner, cleaning oil on brake pads shouldn’t be hard. Here are a few steps to follow

  • Start by removing the oily disc brakes and use alcohol or a degreaser to remove the oil.
  • Rub the brake pads with a clean cloth and get rid of the loose dirt.
  • Make sure you don’t touch the clean surface leaving behind oil on the pads. You have to clean the brake pads as clean as possible. Any grease or oil residue on the disc brakes will reduce the stopping power of your braking system.

To Sum Up

No matter the types of brake pads or discs you use, it’s wise to check and clean them regularly. Cleaning disc brakes thoroughly involves using suitable cleaning agents, including the most effective brake cleaner or alcohol. It’s not an arduous process, and you can do much with the right skills and determination.

Leave a Comment