Since dominating the American motorcycle world since 1903, only the best rear shocks for Harley Davidson touring have been able to withstand so many miles on the road. And with so many miles under the wheels, why wouldn’t you want the best rear shocks. Pulverized roads, potholes, speed breakers, and pot-holed streets are some challenges you encounter when riding a Harley Davidson touring bike on and off-road. Therefore, your bike must have adequate suspensions to offer control with every bump you come to. Better shock absorbers make for comfortable riding as well as longer-lasting shocks.
Here are the best rear shocks for Harley Davidson touring on the market.
Editor’s Pick-Rear Shocks For Harley Davidson Touring
Best Rear Shocks For Harley Davidson Touring Reviews In 2023
1. XKH- 267mm 10.5″ Motorcycle Rear Shock Absorber Chrome Damper Compatible with Harley
This rear shock absorber measures 10.5 inches eye-to-eye (at the end of the springs). It fits Harley and other twin shock models with thick enough springs to support it and is preload adjustable for tuning. Please let us know if you have questions about how to use this or any other motorcycle components we sell!
Damper Compatible With Harley
XKH Motorcycle Rear Shock Absorber Chrome Damper Compatible with Harley, GasX-1 Series 2.0mm Coated Threads, Color: Chrome. The XKH shock absorber is designed to replace motorcycles’ original equipment shock absorbers. Its variable settings allow for a customized ride experience and better handling – making it an excellent choice for your new or customized bike.
2. Chrome Lowering Air Shocks Harley Touring Bagger
Chrome Lowering Air Shocks for Harley Touring Bagger. Available in custom sizes and may be used on All Harley Sportster Models and CVO models but is NOT recommended unless the rider will be riding solo without any passenger or luggage. For riders who are over 6 feet tall, it is recommended that a longer spring be installed to avoid bottoming out. You can specify the spring rate in your order notes at checkout.
These chrome lower air shocks fit 1980-2013 Touring and Bagger models. They measure 12″ eye to eye and come fluid-filled, ready to install right out of the box. Reuse your stock lines & fittings or purchase new. Hand pump only (15-25 lbs) will fill these shocks. If you use an air compressor, you’ll risk damaging the shocks.
3. HTTMT LS003- Compatible with Black 10.5 Inches Slammer Lowering Shocks Pair
High-performance shock absorbers and struts from leader HTML. Lowered factory springs to lower your vehicle an additional inch (1-1/2″) further than the factory height. These shocks are fully adjustable to dial in the most comfortable ride for you or your passengers during long road trips.
Slammer Offers An Extensive
This pair of Slammer lowering shocks is designed for the 1984-2013 Harley Davidson Touring FLT/FLHT/FLTR models. For superior handling and stability on the road, Slammer offers an extensive line of performance shock absorbers that offer a range of load capacities and ride characteristics. Each high-quality shock is crafted to meet or exceed OEM specifications, ensuring exacting performance and durability.
The Slammer Lowering Shocks are built to last and deliver the smoothest ride possible. The 10.5-inch eye-to-eye stubby design will help keep the ground clearance from getting any higher than it needs to be. These shocks are preload adjustable for a great custom fit for your bike, and there are no shims to deal with! Preload is factory preset at default setting for Soft.
4. Progressive Suspension 412-4077B Black Anodized Finish
These Progressive Suspension 412-4077B fittings are durable and offer a safer and smoother ride. They raise the front of your bike by five millimeters, which makes handling easier and also helps to keep it from standing up when braking. They are made of black anodized steel and feature double wall damping that is multistage velocity sensitive for a more comfortable ride.
Popular Adjustable Shocks
The 412-4077B is one of Progressive Suspension’s most popular adjustable shocks. This shock features a 5 position cam style preload adjuster, a high-pressure gas-charged compression damping system that utilizes a floating piston; this floating piston helps to maintain consistent damping performance throughout the shock’s stroke.
This is a heavy-duty progressive rate spring. It has a natural rubber spring guide rod and clamp-type shock hardware with stainless steel control arms for durability. The body mount includes greasable nylon bushings for ease of suspension pivoting. Outstanding performance at an affordable price.
5. Progressive Suspension 944-4020UT Ultra Touring Heavy Duty Shocks
Heavy Duty rear shocks fit 1984-2018 KLR650, KLX250, and KLX/KFX models. Perfect for riders over 250lbs. These are high-end race-quality shocks that are adjustable in compression damping, preload, and ride height to provide superior performance on the street or trail. Adjustable compression damping allows for fine-tuning for different loads and conditions.
Heavy Duty Shocks
Progressive Suspension 944-4020UT Ultra Touring Heavy Duty Shocks are compatible with 1986-2018 Electra Glides, 1998-2018 Road Glides and 1994-2018 Road Kings, 2006-2018 Street Glides, and 2015-2018 Ultra Limiteds. These shocks feature an 11×7 shock cup and a handlebar mount remote reservoir. They also include a piston seal that helps prevent oil loss during riding conditions. The shock reduces sag by 35% over stock height and is 17″ wide for increased stability on long rides.
Frequency Of A Bump
The Progressive Suspension 944-4020UT Heavy Duty Touring Shocks feature Frequency Sensing Technology (FST), which allows the shocks to sense the frequency of a bump and automatically adjust damping for superior ride quality. Adjust spring pre-load by hand; no special tool is needed! And with high-pressure gas-charged shocks and progressive rate main springs specifically designed for touring, you can finally stop suffering on those long rides in comfort. This set is designed to give you years of worry-free performance.
6. Mofun Preload adjustable 10.5 in Rear Shocks Lowering Kit Compatible
Mofun Preload adjustable 10.5-inch Rear Shock Lowering kit is designed to give your bike a lower center of gravity and improved handling. The adjusting kit fits 1980-2022 Harley Davidson Touring FLT/FLHT/FLHR/FLTR/FLHX (Excluding Trike models, VRSC, Street Glide, and Softail models with Fork Cartridge). It includes 10.5″ gas spring shocks, replacement struts, chrome springs, yokes & mounting hardware, an instruction manual, and all necessary hardware for installation.
Mofun adjustable preload shock kit allows riders to adjust their rear suspension to the weight of their riding gear, passenger, and gear. The increased spring rate and damping ability will help eliminate bottoming out on rough trails and speed bumps.
Wheel Pressure Adjustment
Designed for street and light off-road use, this kit features a lightweight spring design with an independently adjustable preload knob for rear wheel pressure adjustment. With the independent preload adjustment, you can tune your bike’s ride height and ensure it is set up just right for you at all times. This motorcycle lowering kit includes two front springs, two rear springs, bushings/bushing heads, spring cups, ride height adjustment tools,s, and hardware.
How To Choose The Best Rear Shocks For Harley Davidson Touring Before Purchasing
Use of Gradient Suspension
A notable American maker of motorcycle suspension is Progressive Suspension. Among the many motorcycle companies for which it makes suspension is the well-known Harley Davidson, which is renowned for the quality and style of its products.
In addition to not changing color, the Progressive Suspension items do not alter angle, they do not stretch and they do not change their position or stack. In addition, the suspensions do not employ a black background and do not overlay anything behind or over the logo.
As a dependable suspension maker, the company has been in business since 1982. Their suspensions are perfect for long-distance biking.
Aftermarket suspension manufacturer Burly Brand has been in business for over two decades and is a prominent supplier of high-quality suspensions. For long-distance travel on bikes with heavy loads, these suspensions are excellent.
The firm was founded in the 1990s by two brothers and has since expanded to include the production of numerous motorcycle equipment, such as handlebars and shocks. Their products stand out because they are tough, straightforward, and unafraid.
Their products not only enhance the aesthetics of your equipment but also improve its functionality. They take ordinary metals like chrome and steel and turn them into works of art that can’t be ignored.
The goal of the Legend Suspension brand is to dominate the suspension market with a combination of innovation and high-quality components. For them, customer satisfaction and the safest and smoothest ride are more important than anything else.
It all began in 1998 when Legend Suspensions was founded, and it has since developed into a respected suspension manufacturer. All Harley-Davidson models’ suspensions are made by this company. Legend Suspension is the place to go if you’re looking for the greatest Harley Davidson touring rear shocks.
The company’s products are thoroughly tested before they are distributed to the public. You may buy them confidently, knowing they will deliver on their promises.
JRi Shocks is a significant supplier of shocks for Harley-Davidson and Indian Motorcycles, amongst others.
The company was established in 2007 by Jeff Ryan. Jeff Ryan was a pioneer in the development of the electric shock. Since he’s been here for 40 years, the company has grown into one of the greatest suspension manufacturers for sports and street use.
We use only the best materials in the United States to build our JRi Shocks. They’ve won a slew of accolades for their products, and they’re committed to providing the best suspensions on the market in terms of functionality and comfort.
Furnace of Fox
Customers worldwide know that Fox Factory goods are of the highest quality.
When riding on any terrain, you can trust the suspension systems made by this publicly traded Georgia firm, whose headquarters are in Braselton, GA.
Frequently Asked Question
What Size Are Stock Harley Shocks?
For most models, the stock shock length is between 12 and 13 inches. Eyelet-to-eyelet on centers is how shock lengths are measured when completely extended. If one end of the bike needs to be raised, it’s possible that the other end will also need to be raised.
How Long Do Harley Shocks Last?
Shocks on Harley-Davidson motorcycles are expected to last for at least 30,000 miles before needing replacement. The majority of shocks will require rebuilding or replacement after 40,000 km. Every 30,000 miles, inspect your Harley’s shocks to ensure maximum performance.
What Size Shocks Are On A 2018 Road Glide Special?
Registered. The OEM shock for a Road Glide Ultra is 13 inches, whereas the OEM stock shock for a Road Glide Special is 12 inches, according to what I’ve read on the subject (and what I found while searching for new shocks).
Finding the best Harley-Davidson Touring shock is just as important as finding a pair of boots. A bike is only as good as its rider and if you don’t have the right equipment, you’ll never be able to reach your full potential and look for the best way through life.